Automatic Door Repair Vancouver & Lower Mainland
When an automatic door stops working, building accessibility, security, and daily operations can be affected. Coras Automation’s automatic door repair Vancouver services throughout Vancouver and the Lower Mainland for commercial, institutional, healthcare, and multi-residential properties.
Whether your door is not opening, not closing, operating erratically, or has been damaged, our technicians can diagnose and repair the issue quickly.
Automatic Door Repair Services
Automatic doors experience wear and tear from daily use. Sensors, operators, switches, locks, and safety devices can all fail over time.
Coras Automation provides automatic door repair Vancouver troubleshooting, repair, and replacement services for a wide range of automatic door systems. Our technicians identify the root cause of the problem and recommend the most cost-effective solution to restore safe and reliable operation.
Furthermore, we service automatic door systems installed by other contractors and manufacturers.
Common Automatic Door Problems We Repair
Automatic Door Won’t Open
Faulty activation switches, sensors, power supplies, or control boards can prevent the door from opening properly.
Automatic Door Won’t Close
Safety sensors, timing settings, and mechanical issues may cause doors to remain open or close incorrectly.
Door Opens Unexpectedly
Improper sensor alignment, environmental conditions, or electronic faults can cause unwanted activations.
Slow or Jerky Operation
Worn components, improper adjustments, or failing operators can affect performance.
Broken Push Buttons & Wave Sensors
Activation devices may fail due to age, impact damage, or electrical issues.
Damaged Door Operators
Commercial operators occasionally require repair or replacement because of component failure or excessive wear.
Automatic Door Operators We Service
As part of our automatic door repair Vancouver services, we repair and service many types of automatic door operators, including:
- Record Automatic Doors
- Ditec Automatic Doors
- dormakaba Operators
Even if your operator is not listed above, our technicians can often diagnose and repair the system.
Industries We Serve
Healthcare Facilities
Hospitals, clinics, medical offices, dental practices, and healthcare centres rely on automatic doors for accessibility and infection control.
Schools & Universities
Educational facilities require reliable door systems to support students, staff, and visitors.
Commercial Buildings
Office towers, retail locations, and public buildings depend on automatic doors for convenience and accessibility.
Strata & Multi-Residential Buildings
Entrance doors, amenity spaces, and accessible washrooms all require dependable operation.
Restaurants & Hospitality
Automatic doors help improve accessibility and customer experience in busy commercial environments.
Why Automatic Door Repairs Should Not Be Delayed
A malfunctioning automatic door can create safety risks, accessibility concerns, and liability issues.
In addition, a failed automatic door may prevent a facility from meeting accessibility requirements or disrupt normal building operations.
Prompt repairs help:
- Maintain accessibility
- Improve user safety
- Reduce liability risks
- Extend equipment life
- Prevent costly future repairs
Why Choose Coras Automation
Local Automatic Door Specialists
Coras Automation has over 23 years of experience designing, installing, and servicing automatic door systems.
We work with:
- Property managers
- Building owners
- General contractors
- Facility managers
- Healthcare providers
- Educational institutions
Our focus is delivering reliable systems that are easy to use, easy to maintain, and built for long-term performance.
What People Are Saying
We're Here To Help!
Office
510 Agnes St, New Westminster, BC, V3l 0J6
Hours
S-S: Closed
Call Us
Areas We Serve
Coras Automation provides automatic door repair, maintenance, inspections, upgrades, and emergency service throughout Vancouver and the Lower Mainland. Our technicians service all major brands including Record, Ditec, Dormakaba, Stanley, Horton, Besam, Entrematic, Hunter, and automatic washroom door systems.
Whether you require emergency automatic door repair, preventative maintenance, safety inspections, sensor replacement, operator troubleshooting, or accessibility upgrades, our team can respond quickly throughout the region.
Vancouver
Automatic door repair in Downtown Vancouver, Kitsilano, Mount Pleasant, Yaletown, False Creek, East Vancouver, South Vancouver, Marpole, Kerrisdale, Oakridge, UBC, and surrounding areas.
Burnaby
Automatic door service and repairs for commercial buildings, retail stores, healthcare facilities, offices, and strata properties throughout Burnaby.
Richmond
Automatic door repair, sensor replacement, accessibility upgrades, and preventative maintenance for businesses and public facilities throughout Richmond.
New Westminster
Emergency automatic door repair and scheduled maintenance services for commercial, institutional, and residential properties.
Surrey
Automatic door operator repairs, safety inspections, and accessibility upgrades for offices, shopping centres, healthcare facilities, and multi-family residential buildings.
Coquitlam, Port Coquitlam & Port Moody
Service and repair of automatic door operators, washroom door systems, activation switches, safety sensors, and accessibility equipment.
North Vancouver & West Vancouver
Automatic door maintenance, repairs, and upgrades for commercial properties, strata buildings, banks, medical clinics, and public facilities.
Delta, Langley & White Rock
Automatic door troubleshooting, preventative maintenance, emergency service, and accessibility compliance upgrades.
Maple Ridge & Pitt Meadows
Automatic door repair and service for retail, healthcare, municipal, and commercial facilities.
Abbotsford & Chilliwack
Automatic door repairs, operator replacements, safety inspections, and preventative maintenance programs.
Additional Service Areas
- Vancouver
- Burnaby
- Richmond
- New Westminster
- Surrey
- Coquitlam
- Port Coquitlam
- Port Moody
- North Vancouver
- West Vancouver
- Delta
- Ladner
- Tsawwassen
- Langley
- White Rock
- South Surrey
- Maple Ridge
- Pitt Meadows
- Abbotsford
- Chilliwack
- UBC
- Yaletown
- Kitsilano
- Kerrisdale
- Oakridge
- Marpole
- Steveston
- Queensborough
Need automatic door repair in your area? Contact Coras Automation today for fast, professional service throughout Metro Vancouver and the Fraser Valley.
Frequently Asked Questions
How quickly can automatic doors be repaired?
Most issues can be diagnosed during the initial service visit. Repair timelines depend on parts availability and system condition.
Do you repair automatic doors installed by another company?
Yes. We service many automatic door systems regardless of the original installer.
Do you offer preventative maintenance?
Yes. Scheduled maintenance programs are available for commercial, healthcare, educational, and multi-residential facilities.
Do you repair accessible washroom doors?
Yes. We service accessible washroom automatic door systems, operators, switches, occupancy controls, and locking hardware.
What is an automatic swing door?
Do automatic doors need to comply with building code in BC?
How much does it cost to install an automatic swing door in BC?
Can you retrofit an existing door with an automatic operator?
What kind of activation options are available?
Touchless wave sensors
Accessible push plates
Key fob/card access
Mobile phone unlock
Do automatic swing doors require regular maintenance?
Do you install in strata and apartment buildings?
Are your installations compliant with accessibility standards?
Which areas in British Columbia do you service?
We proudly serve the entire Lower Mainland region of BC, including:
-
Vancouver
-
Burnaby
-
Surrey
-
Richmond
-
Coquitlam
-
New Westminster
-
North Vancouver
-
West Vancouver
-
Langley
-
Delta
-
Port Coquitlam
-
Port Moody
-
Maple Ridge
-
Pitt Meadows
-
White Rock
We also handle projects in nearby areas on request — contact us to confirm availability.
Which manufacturers do you use?
We mostly install Camden activation products and Ditec/Record auto door openers. The Ditec HA8 and HA9 being the most popular. The Record Simpleswing 8200 for larger applications.
What sensors are used in automatic doors
Infrared motion sensors are used in automatic doors to detect movement.
What is the difference between a motion sensor and a motion detector?
A motion sensor typically refers to the individual component that detects movement, whereas a motion detector refers to the complete system, which may include the sensor itself along with alarms, control panels, and other integrated devices.
How do automatic doors detect people?
At our Vancouver based automatic door company, we install doors equipped with advanced sensor systems that detect the presence of people or objects nearby. These sensors use cutting-edge technologies such as infrared, microwave, and motion detection to ensure smooth, safe, and efficient door operation in any environment.
How to fix an automatic door sensor?
Step 1: Identify the Sensor Type
Determine whether the sensor is infrared, microwave, or a combination type. Check the brand and model for compatibility.
Step 2: Purchase a Compatible Replacement
Order the correct sensor from a trusted supplier or your automatic door service provider in Vancouver, BC.
Step 3: Disconnect Power to the Door
For safety, switch off the power supply to the automatic door system before beginning any work.
Step 4: Remove the Existing Sensor
Carefully unscrew or unclip the damaged sensor and disconnect any wiring or mounting components.
Step 5: Install the New Sensor
Mount the new sensor in the same location and reconnect all wiring as per manufacturer instructions.
Step 6: Restore Power and Test
Turn the power back on and test the door to ensure the new sensor is working properly and safely.
Can automatic doors be opened manually?
Automatic doors are widely used in commercial buildings for their convenience, accessibility, and energy-saving benefits. In the event of a power outage or system failure, most automatic doors are designed to be opened manually, ensuring continued access and safety.
How much does it cost to automate a door?
Typically the most cost-effective option, swing door openers range in price from $3,000 to $4,500, making them ideal for budget-conscious installations.
How long do automatic doors last?
With regular maintenance and proper care, a well-installed automatic door can last up to 20 years—making it a smart, long-term investment for your business. To maximize their lifespan and performance, it’s essential to keep your automatic doors properly serviced and maintained.
Do automatic doors work without power?
The automated door remains locked when there is no power—requiring electricity to both lock and unlock. In the event of a power failure, the door will stay securely locked. However, an emergency pull cord allows manual release. Once the cord is pulled, the door can be opened, but it will remain unlocked until power is restored.